What Should We Pay Attention to When we are operating the Calcium Carbonate Grinding Mill?Posted: 2017-01-04

  • 1. Before the calcium carbonate grinding mill is turned on, you should check at first, if all the service doors are closed tightly, and then check the crusher pallet gap is consistent with the feed particle size, adjust the speed of the analysis machine should be similar to the finished product size requirements. Finally, press the boot order.

    First, start bucket elevator

    Second, start the jaw crusher

    Third, after the material is putted into the silo, start the analyzer

    Fourth, start the blower (empty load start, wait for normal operation before loading)

    Fifth, start host of calcium carbonate grinding mill, and start the host immediately when the electromagnetic vibration feeder is started. At this point, the calcium carbonate grinding mill is beginning to work

    2. The operation sequence of calcium carbonate grinding mill as follows: Start hoist---crusher--- analyzer---fan---host---feeder.

    calcium carbonate grinding mill

    3. When the calcium carbonate grinding mill is turned down should obey following order: feeder machine---host---fan---analysis machine.

    First, stop feeding to the feeder machine

    Second, after stop the feeder machine, stop the host about one minute later

    Third, stop the blower when the residual powder is cleaned

    Fourth, the final step is close the analysis machine

    Note: After the hopper transporting material to the silo a certain amount, we need to stop the crusher at first and then stop lift, this point should be changed accrodding the amount of storage material.

    4. Note: the calcium carbonate grinding mill is not allowed to refuel at random in when the machine is normal work, to ensure the safety of production, once somewhere on the grinding mill occur the abnormal noise, or a sudden increase in load, the machine should be stopped immediately, and then troubleshooting, to avoid major accident.

Previous:How To Deal With The Noise Problem When The Carcium Carbonate Grinding Mill Is Working
Next:Application of Calcium Carbonate in Industries




Calcium Carbonate Grinding Mill

Capacity:0.4-30 T/H
Feeding size:≤20mm
Output Size:150-3000mesh
Calcium Carbonate Grinding Mill is the equipment specializing in producing fine and superfine calcium carbonate powder

    Contact us

  • Office Address: No.19Fuqing Rd,Shanghai
  • E-mail: Sales@clirik.com

  • Sales Department Tel :0086-21-20236178

Copyright 2014 by Shanghai Clirik Machinery Co. LTD All rights reservedE-mail:sales@clirik.com