HGM125 calcium carbonate superfine millPosted: 2019-09-02

  • HGM125 calcium carbonate superfine mill, also named calcium carbonate ultrafine powder mill, is a high-efficiency, low-consumption and ultra-fine powder processing equipment that has been repeatedly innovated, tested and designed by Shanghai Clirik Machinery Co., Ltd.
     
    calcium carbonate superfine mill ultrafine powder mill
     
    The complicated procedures of traditional airflow grinding and ball mill grinding and selecting powder greatly reduce the production cost and improve the product fineness. Thousands of users have proved that the equipment has the advantages of superior performance, stable quality, simple operation and convenient maintenance. It is an ideal equipment for ultra-fine powder processing.
     
    Hot phone: +8613917147829 Ultrafine grinding machine, ultrafine powder grinding machine.
     
    [Features]: Good stability, high reliability, advanced technology, long service life, easy maintenance
     
    [Performance evaluation]: ★★★★★
     
    [Product introduction]
     
    1. Finished fineness of HGM125 calcium carbonate superfine mill: 325 mesh - 3000 mesh.
    HGM125 calcium carbonate superfine mill, ultra-fine powder mill equipment:
     
    2. HGM125 calcium carbonate superfine grinding machine, ultrafine powder grinding machine full set includes crusher, bucket elevator, storage bin, vibrating feeder, micro-grinding host, frequency classifier, double cyclone powder collector, Pulse dust removal system, high pressure fan, air compressor, electrical control system.
     
     
    3. Performance and characteristics of HGM125 calcium carbonate superfine mill, ultrafine powder mill:
     
      High efficiency and low consumption 
    In the case of the same fineness of the finished product and the same motor power, the output of the jet mill, the agitator mill and the ball mill is more than doubled; the energy consumption is 30% lower.
      Consumable parts have long service life 
    The grinding roller and the grinding ring are forged with special materials, which greatly improves the durability. In the case of the same material and finished product fineness, the service life of the wearing parts of the impact crusher and the turbo crusher is 2-3 times longer, generally more than one year; when processing calcium carbonate and calcite, the service life is up to 2-5 years.
      High safety and reliability 
    Since there is no rolling bearing or screw in the grinding cavity, there is no problem that the bearing and its sealing member are vulnerable, and there is no problem that the screw is loose and the machine is destroyed.
      High product fineness 
    Raymond mills and other coarse-grinding products have a fineness of 325 mesh (47 microns), compared to 325 mesh to 2500 mesh (47-5 micrometers). Adjusted arbitrarily, and the fineness can reach D97≤5μm at one time.
      Environmentally friendly cleaning 
    The dust collector is used to capture dust, and the muffler is used to reduce noise, which is environmentally friendly and clean.
      Advanced only frequency conversion speed control device 
    The use of the device is that the processed powder has a more uniform particle size and is convenient to adjust.
     
    4. HGM125 calcium carbonate superfine mill, the application range of ultrafine powder mill:
    It is mainly suitable for ultra-fine powder processing of non-inflammable and explosive brittle materials with medium and low hardness and Mohs hardness ≤6, such as calcite, chalk, limestone, dolomite, carbon black, kaolin, bentonite, talc, mica. , magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomaceous earth, barite, gypsum, alum, graphite, fluorite, phosphate rock, potassium ore,pumice, more than 100 kinds of materials.
     
    Fine powder finished product size can be adjusted between 325-3000 mesh, the output can reach 0.7-7.5 tons per hour.
     
    Shanghai Clirik Machinery Co., Ltd. HGM series calcium carbonate ultra-fine grinding machine has five models, namely HGM80, HGM90, HGM100, HGM100A, HGM125.
     
    5. HGM125 calcium carbonate superfine grinding machine, ultra fine powder grinding machine works:
    After the bulk material is broken into small particles by the crusher, it is sent to the storage bin by the hoist, and then passed through the vibrating feeder and the inclined guide pipe, and the material is evenly sent to the bulk tray on the upper part of the inner turntable of the main machine. When the mill is working, the main motor drives the main shaft and the turntable through the reducer, and the turntable passes through the edge of the roller pin to drive dozens of grinding rolls to rotate and roll in the grinding ring raceway. The material is scattered to the periphery under the action of centrifugal force, and falls into the magic cavity, which is impacted, rolled and ground by the grinding roller in the loop of the grinding ring. It is repeatedly ground into a powder through a three- or four-layer loop. The high-pressure fan draws outside air into the machine through suction and brings the pulverized material into the classifier. The high-speed rotating impeller screens it, and the unqualified coarse powder falls back to re-grind. The qualified fine powder enters the cyclone dust collector with the airflow, and the dust falls, which is discharged from the bottom discharge valve. A small portion of the fine dust enters the dust collector with the airflow and adheres to the surface of the filter bag. The pulse valve controls the high-pressure airflow to be instantaneously sprayed from the inside of the filter bag. The dust adhering to it will fall due to the sudden shaking of the filter bag, and the conveyor at the bottom will send the two collected fine powder materials out for the finished product packaging. The filtered clean air is finally removed at the muffler outlet.
     
    6. Technical parameters of HGM125 calcium carbonate superfine mill, ultrafine powder mill:
     
    model
    HGM80
    HGM90
    HGM100
    HGM100A
    HGM125
    Average working diameter / mm
    800
    930
    1035
    1300
    Number of loops / layer
    3
    to 4
    3
    4
    4
    Number of grinding rollers / one
    twenty one
    24 to 32
    27
    34 to 36
    40 to 44
    Spindle speed / rpmin
    230 to 240
    200 to 220
    180 to 200
    135 155
    Feeding size / mm
    ≦ 20
    Finished product size range /um(mesh)
    5-47 (325~2500)
    Finished product output t/H
    0.5-4.5
    0.6-6.5
    0.7-7
    1-8.5
    1.5-12
    Mounting shape length * width * height / m
    13.9*4*6.2
    14.7*4.8*7.2
    18*4.6*8.6
    14*9*10.25
    Machine capacity / KW
    145-165
    185-204
    263
    263-290
    380-430
     
    Note: The discharge granularity can be adjusted according to customer requirements. This parameter is for reference only. If there are any changes in specifications, the actual product of the company shall prevail.
Previous:Stone Pulverizer Machine for Calcium Carbonate
Next:3000 mesh high quality calcium carbonate grinding mill grinding plant

Feedback

Feedback

Recommend

Calcium Carbonate Grinding Mill

Capacity:0.4-30 T/H
Feeding size:≤20mm
Output Size:150-3000mesh
Calcium Carbonate Grinding Mill is the equipment specializing in producing fine and superfine calcium carbonate powder

    Contact us

  • Office Address: No.19Fuqing Rd,Shanghai
  • E-mail: Sales@clirik.com

  • Sales Department Tel :0086-21-20236178

Copyright 2014 by Shanghai Clirik Machinery Co. LTD All rights reservedE-mail:sales@clirik.com